Stunning Wall Paints
Check out our new Wall Paint Effect for a stunning antique looking effect


An original effect, which distinguishes itself with a fake deepness between pearl and opaque. Exclusive fragments of precious pearls which are gently pressed during the application phase, leaves a pearlescent trail on the surface, with a warmth three-dimensional effect and...a flame of elegance.



  • A valuable finish of top class interior decoration, effect FLASHPEARL. Which allows you to obtain, with a very simple application, a unique "brand" result of extraordinary beauty. ADORE is particularly suitable in environments of modern setting and / or neoclassical where refined elegance is requested, both in public places and private homes. ADORE is washable after about three weeks from the application, non-flammable and provides good water vapour permeability.

  • Organic and Inorganic pigments, acrylic copolymer emulsion, special non-toxic additives. And 'free from harmful Substances such as solvents and pigments containing lead or chrome.

  • Sandpaper and dust any imperfections with STUCCOMURO and apply 1 coat of UNIVERSALFISSATIVO, which should be correctly diluted with water at a ratio of 1:5 up to 1:10 according to the absorption of the surface. Leave to dry for at least 4 hours and apply 1 or 2 coats of PRIMER S of the color Z-90, leave at least 4 to 5 hours between each application.
  • Add 70 ml. Of ARTHE CONCENTRATO of the colour chosen, mix slowely by hand all the product and it is then ready for use. (The mixed product has a pot-life of about 15 days).
  • Spread ADORE with a SPALTER DECORA’ tool on the surface using irregular movements like cris crossing brush marks Wait 20 minutes and start to give the first pressing with a stainless steal trowel. After 10 minutes go back over the applied surface putting pressure on the stainless steal trowel using the same movements as before.
  • Dilution: Ready to use
  • Yield: 10 m² / l

« Back To Products

Copyright © 2016. All Rights Reserved.