WELCOME TO ADULIS!!!

 

 

 

Loading

Velatura-Rustica

Stunning Wall Paints
Check out our new Wall Paint Effect for a beautiful crystal like shining interior

Velatura-Rustica

A system of simple application, where the typical nuvolato and chiaro scuro effects of the Velatura-Rustica revail over the smooth base. Ideal for decorating the wall surfaces of homes and buildings that aim at recreating a classic, antique-looking feel.

Velatura-Rustica:

SPECIFICATIONS

     

  • Velatura-Rustica is a semi-covering finish for both internal and external formulated with acrylicsiloxanic emulsions characterized by a fine decorative antique effect. It can be applied n both smooth and rough, mineral and synthetic supports.
  • When applied on outdoor on our SPIVERSIL ANTICO), it produces some elegant light-and-shade effects which enriches and protect the external wall finish guaranteeing both an excellent water-repellent power and at the same time unaltering the high permeability to water vapour of the surface ( the Velatura-Rustica RUSTICA FINISH).
  • When applied on indoor supports, it can be applied after a previous treatment with REOSAN OPACO (if a smooth final effect is required), so as to guarantee an good wash ability and an excellent resistance against bacteria. (The Velatura-Rustica CLASSIC FINISH).
  • The decorative flexibility the antique effect and excellent performance of color resistance make VELETURA stand out as an excellent product for external wall finishes especially in old city centers and also for the decorating of old fashion internal environments.

COMPOSITION

     

  • Acrylic-siloxanic emulsion, lightproof pigments, additives.

METHOD OF APPLICATION SURFACE PREPERATION

     

  • Velatura-Rustica is supplied as a neutral base of Lt. 4 which can be colored either by ARTHE CONCENTRATO or GLOBAL TINTING SYSTEM according to the indications specified in the color chart.
  • THE Velatura-Rustica “RUSTICA” finish made up of SPIVERSIL ANTICO and Velatura-Rustica
    For internal application on smooth surfaces (gypsum, plaster boards, or smooth paint surfaces ) it is extremely necessary to apply 1 coat of PRIMER RV, after 24 hours you can directly apply SPIVERSIL ANTICO with a stainless steel float and give the finish effect with a plastic float, after 24 hours in order to obtain the Velatura-Rustica RUSTICA finish apply the Velatura-Rustica (colored chosen from the color chart) with a paint brush and obtain the finished effect either with a sponge float of a woolen glove which is used for decorating.
    For external surfaces such as cement or lime base or surfaces with RASSANTE W-04, the base must be solid and there shouldn’t be any trace of old paint in this case it is advisable to use special products in order to remove trace of old paint etc. Then apply I coat of SPIVERSIL PRIMER (special fixing primer) diluted 100% . after 24 hours apply SPIVERSIL LISCIO diluted at a ratio of 50% with water wait for a least 12 hours and then apply SPIVERSILANTICO with a stainless steel float and give the finish effect with a plastic float.
  • After 24 hours in order to obtain the Velatura-Rustica RUSTICA finish apply the Velatura-Rustica (colored chosen from the color chart) with a paint brush and obtain the finished effect either with a sponge float of a woolen glove which is used for decorating. THE Velatura-Rustica “CLASSIC” finish made up of REOSAN OPACO and Velatura-Rustica Sandpaper, putty and dust any imperfections with STUCCOMURO or POLISTUCK and apply 1 coat of FISSATIVO UNIVERSALE which should be correctly diluted with water a ratio of 1:5 fino ad 1:10 depending on the absorbing of the surface. Leave to dry for at least 4 hours and then apply 2 coats of water paint REOSAN OPACO correctly diluted (please consult the Technical data sheet) leave 4 to 5 hours between each application. proceed with the application of Velatura-Rustica (choose a color from our color chart) with a paint brush and immediately while the paint is still fresh go over the surface with circular movements with a special woolen glove. Warning: do not apply on a damp wall or if the weather conditions are not favorable for example in foggy or raining conditions. Apply when the temperature is between 5 and 30°C.


« Back To Products


Copyright © 2016. All Rights Reserved.